Sherwood R-807 Troubleshooting Guide download pdf (Page 19)

ENGLISH

LISTENING TO RADIO BROADCASTS

Auto tuning

• Each time this button is pressed, the tuner is automatically

selected and the band is changed as follows ;

→ FM STereo → FM MONO → AM

("ST" lights up) ("ST" goes off)

• When FM stereo broadcasts are poor because of weak

broadcast signals, select the FM mono mode to reduce the

noise, then FM broadcasts are reproduced in monaural

sound.

• Manual tuning is useful when you already know the

frequency of the desired station.

• After selecting the desired band, press the TUNING UP(▲,

+)/ DOWN(▼, -) buttons repeatedly until the right frequency

has been reached.

Manual tuning

• The tuner will now search until a station of sufficient

strength has been found. The display shows the tuned

frequency and "TUNED".

• If the station found is not the desired one, simply repeat

this operation.

• Weak stations are skipped during auto tuning.

1. Select the tuner and then the desired band. 2. Press the TUNING UP(▲, +)/ DOWN(▼, -) buttons for

more than 0.5 second.

Auto presetting

• Auto presetting function automatically searches for FM

stations only and store them in the memory.

• While listening to radio broadcasts, press and hold down the

(ENTER/)MEMORY button for more than 2 seconds.

• Then "AUTO MEM" flickers and this receiver starts auto

presetting.

• Up to 30 FM stations can be stored.

■Notes:

• FM stations of weak strength cannot be memorized.

• To memorize AM stations or weak stations, preform "Manual

presetting" procedure with using "Manual tuning" operation.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 34 35

No comments

Sherwood R-807 Troubleshooting Guide Page 19