Sherwood R-774 Troubleshooting Guide download pdf (Page 59)

When selecting the Speaker Configuration

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the Speaker Configuration, then press the CURSOR

RIGHT(▶) button to enter the setting menu.

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker, then press the CURSOR

RIGHT(▶) button to enter its setting menu.

Yes/No: Select the desired depending on whether the speakers are connected or not.

2 Channel/1 Channel (Left) : Select the desired depending on the number of speakers connected to SURROUND BACK/

MULTI channels.

• When the CURSOR LEFT(◀) button is pressed on the setting menu, the previous menu will be returned to.

■Notes :

• When speakers are not set to "No", you should set their distances from listening position and crossover frequencies

according to their frequency characteristics. (For details, refer to "When selecting the Speaker Crossover" on page 60 and

"When selecting the Speaker Distance" on page 61.)

• When the "Surround" is set to "No", "Surr back" cannot be set to "2 Channel" or "1 Channel(Left)".

• When the surround back channels' power amplifier is assigned to "Bi AMP" or "Room 2", the "Surr Back" cannot be

selected. (For details, refer to "When selecting the AMP Assign" on page 54.)

3. Press the CURSOR UP(▲)/DOWN(▼) buttons to set the selected speaker as desired, then press the

ENTER button.

4. Repeat the above steps 2 and 3 until the speakers are all set as desired.

ENGLISH

Front

Center

Surround

Surr Back

Subwoofer

BACK NEXT

R-774(A)_ENG_091204:R-774(A)2009-12-21오후2:21페이지59

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 79 80

No comments

Sherwood R-774 Troubleshooting Guide Page 59