Sherwood Wisdom 3 Specifications download pdf (Page 26)

Wisdom 3 DC Manual

CNS

DECO

SAFE

MINUTES



DECO

NITROX

CNS

Pressing Both buttons for < 2 seconds activates the Backlight.

Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.

SET RESERVE TIME (DTR) ALARM VALUE

Factory set for 5 minutes, the RESERVE TIME ALARM VALUE can also be set from 1 to 30 minutes in in-

crements of 1 minute.

After accepting ON as the setting for RESERVE TIME ALARM ON/OFF, the SET RESERVE TIME

ALARM VALUE screen appears with the set point ashing. Appearing on the screen (Fig. 47) will be -

• Alpha graphic RES

• Alarm (speaker) icon

• Reserve Time Value, ashing

• Nitrogen and O2 Bar Graphs

• Tank icon

Pressing and holding the side (Select) button scrolls through the Set Points of at a rate of 4 per second.

Pressing and releasing the front (Advance) button accepts the selection and/or advances to SET DECO

ALARM.

Pressing Both buttons for < 2 seconds activates the Backlight.

Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.

SET DECO ALARM ON/OFF

Factory set ON, the DECO ALARM can also be set OFF. When set OFF, the Alarm will not sound upon en-

try into Decompression Dive Mode.

To access SET DECO ALARM while viewing the SET 2 GO TO screen, press/release the front (Advance)

button 7 times. Appearing on the screen (Fig. 48) will be -

• Alpha graphic DECO

• Alarm (speaker) icon

• Graphic ON (or OFF), ashing

• Nitrogen Bar Graph

Depressing and releasing the side (Select) button toggles between ON and OFF.

Depressing and releasing the front (Advance) button accepts the selection and advances to SET PO2

ALARM.

Pressing Both buttons for < 2 seconds activates the Backlight.

Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.

SET PO2 ALARM ON/OFF

Factory set ON, the PO2 ALARM can also be set OFF. When set OFF, the Alarm will not sound upon as the

Level of PO2 increases.

To access SET PO2 ALARM while viewing the SET 2 GO TO screen, press/release the front (Advance) but-

ton 8 times. Appearing on the screen (Fig. 49) will be -

• Alpha graphic PO2

• Alarm (speaker) icon

• Graphic ON (or OFF), ashing

• O2 Bar Graph

• Graphic Nitrox

Fig. 47 - Set Reserve

Time Alarm

Fig. 48 - Set Deco Alarm

Fig. 49 - Set PO2 Alarm

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 53 54

Comments to this Manuals

No comments

Sherwood Wisdom 3 Specifications Page 26

Comments to this Manuals