Sherwood R-807 Operations Instructions Page 44

  • Download
  • Add to my manuals
  • Print
  • Page
    / 57
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 43
44
R-807 NETWORK AV RECEIVER
Setting the System Setup
AMP Assign
The surround back channels’ power amplier can drive
surround back speakers, front height speakers, and
the ROOM 2 speakers. Depending on the purpose of
the speakers, you should assign the power amplier
accordingly. For details, see “Connecting Speakers” on
page 13 and “Connecting Multi-Room” on page 23.
Menu item Description
Surround Back
Drives the surround back speakers
when connecting the SURROUND
BACK channels to them.
Front Height
Drives the front height speakers
for Dolby Pro Logic IIz playback.
Room2
Drives the ROOM 2 speakers for
ROOM 2 playback.
Automatic Power Control
You can set the standby time for the system to be
turned off. The default setting value is 4H.
Network Standby Control
You can set whether the main unit can be turned on
from other network devices.
Menu item Description
ON
Enables the network standby
function.
OFF
Disables the network standby
function.
Setting the Speaker Setup
After you have installed this receiver and connected
all the components, you should adjust the speaker
settings for the optimum sound acoustics according to
your environment and speaker layout. Whenever you
change speakers, speaker positions, or the layout of
your listening environment, you should also adjust the
speaker settings, too.
Auto Setup
Auto Setup lets you avoid the more difcult listening-
based speaker setup and achieve good surround
sound automatically. Auto Setup provides the optimum
listening environment for the listening position in your
room. When performing the Auto Setup procedure,
you do not need to perform the Speaker Conguration,
Speaker Crossover, Speaker Distance and Channel
Level setup procedures.
1
Check that the speakers are rmly connected to
this receiver.
If your subwoofer has a volume control and
crossover frequency, set the volume halfway
and set the crossover frequency to the
maximum or the low pass lter off.
2
Connect the supplied microphone to the SETUP
MIC jack on the front panel.
Page view 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 56 57

Comments to this Manuals

No comments