Sherwood RD-5503 Operations Instructions Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 119
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
ENJOYING SURROUND SOUND
• Depending on speaker setting, some surround modes can be selected or not as follows :
[ ] : Possible only when "CENTER" or/and "SURR (Surround)" is/are not set to "N (None)".
< > : Possible only when "CENTER" and "SURR (Surround)" are set to "N (None)".
Notes:
• Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance.
(For details, refer to "SETTING THE SPEAKER SETUP" on page 31.)
• Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum
surround mode may vary depending on whether the speaker type is set to "N (None)" or not.
• When 96 kHz PCM digital signal is being input, only the stereo mode will be selected .
Select the desired surround mode
Each time the SURROUND MODE UP/DOWN (, > /
, <) buttons are pressed, the surround mode changes
as follows :
Manual surround mode : You can select the desired of
different surround modes
selectable for the signal being
input.
Auto surround mode : The optimum surround mode will
be automatically selected
depending on the signal format
being input.
• Depending on the signal format which is being input, either
the stereo mode or the 2CH downmix mode is selected.
• To cancel either the stereo mode or the 2CH downmix
mode, select the surround mode with using the
SURROUND MODE UP/DOWN (, > / , <) buttons.
Dolby Digital 5.1 channel sources
Dolby Digital 2 channel sources
PCM (2channel) sources,
Analog stereo sources
[DOLBY DIGITAL, AUTO SURROUND] or <DOLBY DIGITAL>
[DOLBY PLII MOVIE, DOLBY PLII MUSIC, DOLBY PRO LOGIC, AUTO SURROUND] or
<DOLBY DIGITAL>
[DOLBY PLII MOVIE, DOLBY PLII MUSIC, DOLBY PRO LOGIC, MATRIX, CHURCH, THEATER,
HALL, STADIUM, AUTO SURROUND] or <STEREO>
S
ignal format being input Selectable surround mode
ENGLISH
16
To cancel the surround mode for stereo operation
2CH downmix mode
• This mode allows the multi-channel signals encoded in Dolby Digital format to be mixed down into 2 front channels and
to be reproduced through only two front speakers.
(
“AUTO” indicator goes off.)
(
“AUTO” indicator lights up.)
RD-5405(A)_ENG100217_RD-5503(g) 2010-03-30 오전 10:53 페이지 16
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 118 119

Comments to this Manuals

No comments