Sherwood RD-5503 Operations Instructions Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 119
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
• Depending on your speaker type, you can select one of
these following speaker types.
L(Large): Select this when connecting speakers that can
fully reproduce sounds below crossover frequency.
S(Small) : Select this when connecting speakers that can
not fully reproduce sounds below crossover
frequency. When this is selected, sounds below
crossover frequency are sent to the subwoofer
or speakers which are set to "L (Large)" (when
not using a subwoofer)
N(None): Select this when no speakers are connected.
When this is selected, sounds are sent to the
speakers which are not set to "N (None)".
Y(Yes)/N(No): Select the desired depending on whether a
subwoofer is connected or not.
Notes :
• When speakers are set to "S (Small)", you should set
their crossover frequency correctly according to their
frequency characteristics. (For details, refer to "When
selecting the CROSSOVER" on page 34.)
• When "SUB-W" is set to "N (No)", "FRONT" is
automatically set to "L (Large)".
• When the "FRONT" is set to "S (Small)", "CENTER" and
"SURR" cannot be set to "L (Large)".
32
3. Press the CURSOR LEFT()/ RIGHT() buttons to
set the selected speaker as desired.
4. Repeat the above steps 2 and 3 until the speakers are
all set to the desired mode.
About the speaker size
• Select "L (Large)" or "S (Small)" not according to the
actual size of the speaker but according to the speaker's
capacity for playing low frequency (bass sound below
frequency set on the "X-OVER" menu) signals.
• If you do not know, try comparing the sound at both
settings (setting the volume to a level low enough so as
not to damage the speakers) to determine the proper
setting.
2. Press the CURSOR UP()/DOWN() buttons to
select the desired speaker.
ENGLISH
When selecting the CONFIGURATION
1. Press the CURSOR UP()/DOWN() buttons to
select the "CONFIG", then press the ENTER button.
RD-5405(A)_ENG100217_RD-5503(g) 2010-03-30 오전 10:53 페이지 32
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 118 119

Comments to this Manuals

No comments