Sherwood RD-5503 Operations Instructions download pdf (Page 33)

ENGLISH

■When selecting the desired unit

• You can select either "FT (Feet)" or "M (Meter)".

• Once a unit is selected, the distances are automatically

changed in the selected unit.

■When setting the distance

• You can set the distance within the range of 0 ~ 30 feet in

1 feet intervals(or 0.0 ~ 9.0 meters in 0.3 meter intervals).

When selecting the DISTANCE

■Note :

• You cannot select the speakers set to "N (None or No)".

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to

select the DISTANCE, then press the ENTER button.

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to

select the desired item.

3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to

set the selected item as desired.

4. Repeat the above steps 2 and 3 until the distances are

all set as desired.

■About the speaker distance

When enjoying multi-channel surround playback with Dolby

Digital sources, etc., it is ideal that the center, surround and

subwoofer speakers should be the same distance from the

main listening position as the front speakers. By entering

the distance between the listening position and each

speaker, the delay times of center, surround and subwoofer

speakers are automatically adjusted to create an ideal

listening environment virtually as if the center, surround and

subwoofer speakers were at their ideal locations

respectively.

RD-5405(A)_ENG100217_RD-5503(g) 2010-03-30 오전 10:53 페이지 33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 118 119

No comments

Sherwood RD-5503 Operations Instructions Page 33