Sherwood RD-5503 Operations Instructions download pdf (Page 21)

ENGLISH

LISTENING TO RADIO BROADCASTS

Auto tuning

• Each time this button is pressed, the band changes as

follows ;

→ FM ST → FM MONO → AM

("ST" lights up) ("ST" goes off)

• When FM stereo broadcasts are poor because of weak

broadcast signals, select the FM mono mode to reduce

the noise, then FM broadcasts are reproduced in

monaural sound.

• Manual tuning is useful when you already know the

frequency of the desired station.

• After selecting the desired band, press the TUNING UP(+)

/ DOWN(-) buttons repeatedly until the right frequency has

been reached.

Manual tuning

• The tuner will now search until a station of sufficient

strength has been found. The display shows the tuned

frequency and "TUNED".

• If the station found is not the desired one, simply repeat

this operation.

• Weak stations are skipped during auto tuning.

1. Select the desired band.

2. Press the TUNING UP(+)/DOWN(-) buttons for more

than 0.5 second.

Auto presetting

• Auto presetting function automatically searches for FM

stations only and store them in the memory.

• While listening to radio broadcasts, press and hold down

the (MEMORY/) ENTER button for more than 2 seconds.

• Then "AUTO MEM" flickers and this receiver starts auto

presetting.

• Up to 30 FM stations can be stored.

■Notes:

• FM stations of weak strength cannot be memorized.

• To memorize AM stations or weak stations, preform

"Manual presetting" procedure with using "Manual tuning"

operation.

RD-5405(A)_ENG100217_RD-5503(g) 2010-03-30 오전 10:53 페이지 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 118 119

No comments

Sherwood RD-5503 Operations Instructions Page 21