Sherwood RD-5503 Operations Instructions download pdf (Page 34)

ENGLISH

• You can adjust the crossover frequency within the range

of 40 ~ 200 Hz in 10 Hz intervals.

■About the crossover frequency

• When speakers are set to "S (Small)", low frequencies in

those channels that are below the crossover frequency

are to output from subwoofer or front speakers which are

set to "L (Large)" (when not using a subwoofer).

• Refer to the operating instructions of the speakers to be

connected. If the frequency range of your speaker is 100

Hz~20 kHz, the crossover frequency should be set to 100

Hz(or slightly higher).

When selecting the CROSSOVER

• When speakers are set to "S (Small)", be sure to set their crossover frequency correctly according to their frequency

characteristics.

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to

select the "X-OVER", then press the ENTER button.

2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to

set the crossover frequency as desired.

RD-5405(A)_ENG100217_RD-5503(g) 2010-03-30 오전 10:53 페이지 34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 118 119

No comments

Sherwood RD-5503 Operations Instructions Page 34