Sherwood RD-5503 Operations Instructions download pdf (Page 7)

ENGLISH

4. CONNECTING SUBWOOFER PRE OUT

• To emphasize the deep bass sounds, connect a powered

subwoofer.

5. CONNECTING SPEAKERS

6. AC INPUT CORD

• Plug the cord into a wall AC outlet.

• Be sure to connect speakers firmly and correctly according to

the channel(left and right) and the polarity(+ and -). If the

connections are faulty, no sound will be heard from the

speakers, and if the polarity of the speaker connection is

incorrect, the sound will be unnatural and lack bass.

• For installing the speakers, refer to "Speaker placement" on

page 8.

• After installing the speakers, first adjust the speaker settings

according to your environment and speaker layout.

(For details, refer to "SETTING THE SPEAKER SETUP" on

page 31.)

Caution :

• Be sure to use the speakers with the impedance of 6 ohms or

above.

• Do not let the bare speaker wires touch each other or any

metal part of this unit. This could damage this unit and/or the

speakers.

• Never touch the speaker terminals while the AC input

cord is connected to the wall AC outlet. Doing so could

result in electric shocks.

■Connecting speaker wire

1. Strip away approx. 10 mm

(3/8 inch) of wire

insulation, then twist the

wire ends tight.

2. Push the terminal lever,

then keep this condition.

3. Insert the bare part of

the wire into the hole.

4. Put the terminal lever

back, then make sure

it is fastened securely

by pulling the wire

lightly.

RD-5405(A)_ENG100217_RD-5503(g) 2010-03-30 오전 10:53 페이지 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 118 119

No comments

Sherwood RD-5503 Operations Instructions Page 7